This article proposes a 10kW string inverter based on GaN field-effect transistors (FETs). We will also explore the benefits of GaN and highlight the advantages of building such a system for residential solar applications.
[pdf] 
In this article we look at the 3 most common faults on inverters and how to fix them: 1. Overvoltage and Undervoltage. This is caused by a high intermediate circuit DC voltage. This can arise from high inertia loads decelerating too quickly, the motor turns into a generator and increases the inverter’s DC voltage. .
Overvoltage This is caused by a high intermediate circuit DC voltage. This can arise from high inertia loads decelerating too quickly, the motor turns into a generator and. .
This is detected by an imbalance of the currents supplying the motor implying a leakage current to earth is present. This is usually caused by poor insulation resistance to earth. POSSIBLE FIXES: 1. Check insulation resistance of the motor and cabling. 2.. .
We hope you found the information in this article useful if you have a fault not listed and you need technical assistance contact our engineering team. .
This occurs when the motor is taking too much current with reference to the value in Group 99, motor data. POSSIBLE FIXES: 1. Check that motor’s load is not excessive. 2. Check acceleration time – too fast an acceleration of a high inertia load will cause too.
[pdf] Background and goals: The next major changes in field of IT technology and communication that the world expects to witness is technology (5G), which is expected to work around the world by2020. Whil.
[pdf] 
