CdTe solar cells are made by using p–n heterojunctions containing a p-doped Cadmium Telluride layer and an n-doped Cadmium Sulfide (CdS) layer, which may also be made out of magnesium zinc oxide (.
[pdf] Grid-tied systems are solar panel installations that are connected to the utility power grid. With a grid-connected system, a home can use the solar energy produced by its solar panels and electricity that comes from the utility grid.
[pdf] 
Solar photovoltaic (PV) energy systems are made up of diferent components. Each component has a specific role. The type of component in the system depends on the type of system and the purpose. For example, a simple PV-direct system is composed of a solar module or array (two or more modules. .
A direct current (DC) disconnect switch is installed between the inverter load and the solar array. The disconnect switch is used to safely de-energize the array and isolate the inverter from the. .
Safety disconnect switch are required by the National Electric Code (NEC) on the AC-side of the inverter to safely disconnect and isolate the inverter from the AC circuit. This is for troubleshooting and performing maintenance on the system. For grid-connected systems,. .
A charge controller regulates the amount of charge going into the battery from the module to keep from overcharging the battery. Charge controllers can vary in the amount of amperage they can regulate. Some models will include additional features such as. .
Several tools are available to help the solar user to monitor their system. On stand-alone or of-grid PV systems, the battery meter is used. These modules consist of multiple strings of solar cells, wired in series (positive to negative), and are mounted in an aluminum frame. Each solar cell is capable of producing 0.5 volts. A 36-cell module is rated to produce 18 volts. Larger modules will have 60 or 72 cells in a frame.
[pdf] 
